Twickenham Floor Sanding Co.

Advertisements

Make your room glow with sanding for your wooden floor

Even if you are living in the smallest apartment or on a old fashion house ,there are couple of thing that you can do in order to achieve the effect of modern and good looking home area.Changing the whole furniture is expensive and pointless specially when you are living on rent so here we are speaking about things like painting ,floors renovating and this type of things that you can even speak with apartment owner to deduct from your rent. If you choose to sand your floors you need to call upon the experts because even one mistake in process will ruin the flooring, this is why experts do it well,fast and with attention to each detail. Sanding will transform your environment in many ways like-lighting, breathing, good looking, no scratching and long lasting ,so contact us if you need more information any time you wish ! Visit our website!315698_492119774167757_1025036233_n

The Best Ways to Clean Hardwood Floors

The Best Ways to Clean Hardwood Floors

-Prep your floor for cleaning by sweeping or dust-mopping to get rid of large particles of dirt and debris.
-Use a pH neutral cleaner that will be gentle on your hardwood floors.
-Use a fine spray mist to clean your floor in sections. Avoid putting too much liquid on your floors.
-Use a microfiber mop to clean. Traditional mops can work, but they can leave excess water on your floors.
-Skip using white vinegar and water to clean your floors. Using a specially formulated hardwood floor care cleaner is a smart way to maintain the beauty and look of your floors.

shutterstock_38380030.jpg

TOP 10 HARDEST WOODS

TOP 10 HARDEST WOODS:

kitchen-351094_1920.jpg
1. Quebracho – From the Spanish “quebrar hacha,” which literally means
“axe breaker.” Aptly named, wood in the Schinopsis genus is among the
heaviest and hardest in the world.
2. Lignum Vitae -Widely accepted as the hardest wood in the world–this
wood has been listed as an endangered species and is listed in CITES.
Consider Verawood as a very close substitute.
3. Gidgee – This Australian endemic is both very heavy and very strong.
Some pieces are dark enough to be used as an ebony substitute: one that’s
even harder than the original article.
4. Snakewood – It’s easy to see what makes Snakewood so unique–its patterns
and markings resemble the skin of a snake. Limited supply and high demand
make this one of the most expensive woods on eart.
5. Verawood – Sometimes called Argentine Lignum Vitae, this wood is a gem:
inexpensive, great olive-green color, beautiful feathery grain pattern, and
it takes a great natural polish on the lathe.
6. Camelthorn – Formerly classified as a member of the Acacia genus, this
south African hardwood is a tough customer. The wood is stubbornly hard,
and the tree is protected by giant sharp thorns.
7. African Blackwood – In some parts of the world, this wood has achieved
an almost legendary status. Historical evidence points to this wood
(rather than Diospyros spp.) being the original “ebony.”
8. Black Ironwood – Pieces are very seldom seen for sale, as this tree is
too small to produce commercially viable lumber. Like the unrelated
Desert Ironwood, Black Ironwood is an excellent choice for small
turning projects.
9. Katalox / Wamara – Some pieces can be just about a dark as true ebony,
while others are a more reddish brown with black streaks. So much depth
in the Swartzia genus, there’s something for everyone!
10. Cebil- Also known as Curupay or by the exaggerated name Patagonian
Rosewood, Cebil is not a true rosewood. It has a highly variable streaked
appearance not too unlike Goncalo Alves.

SOFTWOODS top 3

SOFTWOODS top 3 

agenda-1928415_1920

PINE: Pine is a softwood which grows in most areas of the Northern Hemisphere. There are more than 100 species worldwide.

Properties: Pine is a soft, white or pale yellow wood which is light weight, straight grained and lacks figure.It resists shrinking and swelling. Knotty pine is often used for decorative effect.
Uses: Pine is often used for country or provincial furniture. Pickled, whitened, painted and oil finishes are often used on this wood.

ASH: There are 16 species of ash which grow in the eastern United States. Of these, the white ash is the largest and most commercially important.

Properties: Ash is a hard, heavy, ring porous hardwood. It has a prominent grain that resembles oak, and a white to light brown colour. Ash can be differentiated from hickory (pecan) which it also resembles, by white dots in the darker summer wood which can be seen with the naked eye. Ash burls have a twisted, interwoven figure.
Uses: Ash is widely used for structural frames and steam bent furniture pieces. It is often less expensive than comparable hardwoods.

HICKORY: There are 15 species of hickory in the eastern United States, eight of which are commercially important.

Properties: Hickory is one of the heaviest and hardest woods available. Pecan is a species of hickory sometimes used in furniture. It has a close grain without much figure.
Uses: Wood from the hickory is used for structural parts, especially where strength and thinness are required. Decorative hickory veneers are also commonly used.

Gap filling process for Fir wooden floors

Gap filling process for Fir wooden floors

For some people there is not a thing better compared to the all-natural look of the standard; proper solid hardwood floor. Through the local flooring specialists you’re going to be able to chance upon a huge collection of quality wooden floors that are suitable for practically any room in your property.

Before the sanding process you have to make sure gaps are filled. A bit like cutting grass, you’ll need two sanders to fill out the floor sanding job. They’re also a favorite choice of our clients since they never require this kind of sanding unlike other kinds of wood floors.

Fir floors are among the most attractive floors found in several homes throughout North America. These are advice on how to put in hardwood floor within your house. Since they are so soft, fir floors are far more challenging to refinish. Water Stains Water could be the huge bad in regards to wooden floors. Leave dampness removal products round the basement such as Damp Ridto help decrease the dampness within the basement and also the smell. Sweep the floors to take out the powder.

bicycle-789648_1920.jpg

 

Then the last floor sanding process would be to buff the wooden floor to accomplish an intensely smooth finish working with a Bona rotary sander (buffer). This will provide your hardwood floors a great shine. This really is needed only in the event the hardwood floors have very many scratches.

Wooden floor repair services

How it works

architectural-389253_1280.jpg

We can give you a estimate over the phone or via email if you have the dimensions, as We work on a rate per sq meter or sq yard the estimate will allow for minor repairs,sanding and finishing with three coats of varnish.
If the price quoted seems reasonable, We will then visit your home to look at the floor and discuss your thoughts, concerns and ideas for the project.
We will then send you a written estimate or email you an estimate for the work.
If you would like to go ahead We will give you a date on which We will hope to start your room. We do not charge for my estimates or advice.

If you have a floor in need of some care and attention, please contact us for a no-obligation quote.